- This topic has 2 个回复, 3 个参与人, and was last updated 5 years, 4 months 前 by tangchuan127.
-
作者帖子
-
五月 16, 2019 - 10:14 下午 #1022YunkaiBai参与者
今天刚在北京路演领了一块织女星开发板,拿到手之后装完环境,准备搞个HelloWorld,build完成之后,Run的时候报错了。
Open On-Chip Debugger 0.10.0+dev-00433-g849f49ca (2019-01-04-07:48)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
adapter speed: 1000 kHz
srst_only separate srst_gates_jtag srst_open_drain connect_deassert_srst
Info : mohor tap selected
Info : adv debug unit selected
Info : Option 1 is passed to adv debug unit
Info : core 0 selected
Info : add flash_bank rv32m1 rv32m1.flash0
Info : add flash_bank rv32m1 rv32m1.flash1
Info : J-Link LPCXpresso V2 compiled Sep 23 2016 12:14:15
Info : Hardware version: 1.00
Info : VTarget = 3.300 V
Info : clock speed 1000 kHz
Error: JTAG scan chain interrogation failed: all ones
Error: Check JTAG interface, timings, target power, etc.
Error: Trying to use configured scan chain anyway…
Error: rv32m1.cpu: IR capture error; saw 0x0f not 0x01
Warn : Bypassing JTAG setup events due to errors
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: Couldn’t read the CPU state
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 1 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 2 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 3 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 4 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 5 of 5
Error: Could not re-establish communication with target
Error: Error while calling rv32m1_is_cpu_running
Polling target rv32m1.cpu failed, trying to reexamine
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: Couldn’t read the CPU state
Examination failed, GDB will be halted. Polling again in 100ms
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 1 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 2 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 3 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 4 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 5 of 5
Error: Could not re-establish communication with target
Error: Error while calling rv32m1_is_cpu_running
Polling target rv32m1.cpu failed, trying to reexamine
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: Couldn’t read the CPU state
Examination failed, GDB will be halted. Polling again in 300ms
Info : Listening on port 3333 for gdb connections
Started by GNU MCU Eclipse
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 1 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 2 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 3 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 4 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 5 of 5
Error: Could not re-establish communication with target
Error: Error while calling rv32m1_is_cpu_running
Polling target rv32m1.cpu failed, trying to reexamine
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: Couldn’t read the CPU state
Examination failed, GDB will be halted. Polling again in 700ms
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 1 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 2 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 3 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 4 of 5
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Warn : Debug IF CPU control reg read failure.
Warn : Resetting JTAG TAP state and reconnectiong to debug IF.
Info : adv debug unit is configured with option ADBG_USE_HISPEED
Warn : …attempt 5 of 5
Error: Could not re-establish communication with target
Error: Error while calling rv32m1_is_cpu_running
Polling target rv32m1.cpu failed, trying to reexamine
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: Couldn’t read the CPU state
Examination failed, GDB will be halted. Polling again in 1500ms
Info : accepting ‘gdb’ connection on tcp/3333
Warn : Target was in unknown state when halt was requested
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: Impossible to stall the CPUWarn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Warn : CRC ERROR! Computed 0x00000000, read CRC 0xffffffff
Error: Burst read failed
Error: auto_probe failed
Error: Connect failed. Consider setting up a gdb-attach event for the target to prepare target for GDB connect, or use ‘gdb_memory_map disable’.
Error: attempted ‘gdb’ connection rejected上面是报错信息
板子上的跳线帽该怎么连?
J6—short
J8—short
J9—short
J10–short
J12–short
我按照上面的连接的,有错吗?
五月 17, 2019 - 5:31 下午 #1036Howard参与者把J8,J9, J10 和J12都断开试试,如果不行,重新修改启动配置,参考《织女星开发板快速入门指南》的第三节启动配置。
五月 30, 2019 - 4:04 下午 #1368tangchuan127参与者解决了吗 请问
-
作者帖子
- 抱歉,回复话题必需登录。